Hitachi HCX5000I - Manual (Page 63)

M ESSAGING S ELEC S ET 500A U SER G UIDE
1-52 HCXTD840, Issue 1, July 2001
Messaging
About
messaging You can use two keys to control messaging as follows:
Turning on
MW lamps
without calling
the station To turn on a message waiting lamp without calling the
station, follow these steps:
1 Press . An idle CAP is selected.
2 Press the key.
3 Dial the desired station number.
The display confirms that the lamp is on and you hear
confirmation tone (three short beeps).
Use this key... To do this...
control the message waiting lamps
on phones in your facility
retrieve multiple message types