Hitachi HCX5000I - Manual (Page 180)

D EMONSTRATING D EFAULT R INGING P ATTERNS
HCXTD840, Issue 1, July 2001 A-9
Demonstrating Default Ringing Patterns
Procedure To demonstrate default ringing patterns:
1 While displaying any ringing frequency (500,
400/500, 400/600, 500/600), the default pattern for
station-to-station calls is displayed and demonstrated.
The default pattern is simply the pattern normally
used.
Figure A-6 provides an example of the default
ringing pattern.
Figure A-6: Default for station-to-station calls
2 To display/demonstrate another ringing pattern, press
again. See
Figure A-7
Figure A-7: Displaying another ringing pattern
*** DATT TEST ***
KEY NO. =
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
500Hz
NORMAL
LINE-LINE (USA)
R-FRQ R-LEV R-PTN DA ROM LCD
*** DATT TEST ***
KEY NO. =
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
500Hz
NORMAL
TRUNK-LINE (USA)
R-FRQ R-LEV R-PTN DA ROM LCD