HP E1368A - Manual (Page 70)

Scanning Using Bus Triggers
This example uses bus triggering ( TRIG:SOUR BUS ) to scan channels 00
through 02 of a single-module switchbox. The trigger source to advance the
scan is the
*TRG command (as set with TRIGger:SOURce BUS ). When
INIT is executed, the scan is started and channel 00 is closed. Then, each
*TRG command advances the scan to the next channel.
TRIG:SOUR BUS Select interface (BUS) triggering.
SCAN (@100:102) Scan channels 00 through 02.
INIT Start scan, close channel 00.
*TRG Advances scan using BUS
triggering.
increment loop Increment loop count.
:SOURce?
TRIGger:SOURce? returns the current trigger source for the switchbox.
Command returns either BUS , EXT , HOLD , or IMM for trigger sources BUS ,
EXTernal , HOLD , or IMMediate , respectively.
Example Query the Trigger Source
TRIG:SOUR EXT Sets trigger source to external.
TRIG:SOUR? Query trigger source.
Chapter 4 HP E1368A/69A/70A Command Reference 69
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com