HP Photosmart 7200 Series - Manual (Page 52)

hp photosmart 7200 series
chapter 7
48
printing problems
Before contacting HP support, read this section for troubleshooting tips or go to
the online support services at www.hp.com/support.
Note: In the presence of high electromagnetic fields, printed documents
and photos may be slightly distorted.
The Printer Status light is
blinking amber.
An unrecoverable error has
occurred.
Try the following:
• Turn off the printer. Unplug
the printer’s power cord,
wait one minute, then plug
it in again. Turn on the
printer.
• If this does not work, go to
www.hp.com/support or
contact HP support. For
contact information, see the
reference guide that came
with your printer.
Problem Possible cause Solution
Problem Possible cause Solution
The printer does not generate
4 x 6 inch (10 x 15 cm)
borderless print output.
You need to select the
appropriate paper size.
Windows
1 Open the printing
properties dialog box. For
more information, see print
using your Windows PC on
page 37.
2 Select the Paper/Quality
tab.
3 From the Size is drop-down
menu, select Borderless
Photo 4 x 6 in. (with tab).
Macintosh OS X
From the Paper Size pop-up
menu in the Page Setup
dialog box, select Borderless
4 x 6 Photo.
Macintosh OS 9
1 From the Page Setup dialog
box, select 4 x 6 Photo
from the Page Size pop-up
menu.
2 Click to select the
Borderless check box.