HP Photosmart 7200 Series - Manual (Page 51)

7
basics guide 47
troubleshooting
Your HP Photosmart printer is designed to be reliable and easy to use. This
chapter answers frequently asked questions and contains information about the
following topics:
•
hardware problems
• printing problems
For more troubleshooting information about software installation, see the
reference guide that came with your printer. For advanced troubleshooting
information, see the HP Photosmart Printer Help. For information about viewing
the printer help, see view the hp photosmart printer help on page 2.
hardware problems
Before contacting HP support, read this section for troubleshooting tips or go to
the online support services at www.hp.com/support.
Note: HP recommends using a USB cable of less than 10 feet (3 meters) in
length to minimize injected noise due to potential high electromagnetic
fields.
Problem Possible cause Solution
The Printer Status light is
blinking green but the printer is
not printing.
The printer is processing
information.
Wait a moment for the printer
to finish processing the
information.
The Printer Status light is
blinking red.
The printer requires attention. Try the following:
• If you have a digital
camera connected to the
printer, check the camera’s
LCD screen for instructions.
• If this does not work, turn
off the printer. Unplug the
printer’s power cord, wait
one minute, then plug it in
again. Turn on the printer.