HP Photosmart 7200 Series - Manual (Page 24)

hp photosmart 7200 series
chapter 2
20
insert a memory card
After you have taken pictures with your digital camera, remove the memory card
from your camera and insert it into your printer. You can print photos
immediately or save the photos to your computer.
When the memory card is inserted correctly, the memory card light blinks and
then remains solid.
Caution! Do not pull out the memory card while the memory card light is
blinking. Removing a memory card while it is being accessed may damage
the printer or the memory card, or corrupt the information on the memory
card. For more information, see remove a memory card on page 23.
To insert a memory card:
1 Remove any memory cards that are already inserted into any of the
memory card slots.
2 Hold the memory card so the correct side faces up. To determine the
correct orientation for your memory card, see the table after these steps.
Note: To use a Sony Memory Stick Duo
™ memory card, insert the memory
card into the adapter that came with the Memory Stick Duo before you
insert it into the printer’s memory card slot.
3 Insert the memory card into the appropriate memory card slot. The end
with the metal contacts or pinholes must go into the printer first.
Caution! Inserting the memory card any other way may damage the
memory card or the printer.
4 Gently push the memory card into the printer until it stops. The memory
card may not insert all the way into the printer.
Caution! Forcing the memory card into the printer too far may damage the
memory card or the printer.