HP Photosmart 7200 Series - Manual (Page 39)

basics guide
print using the direct-printing port
35
4 To access more advanced settings, click Properties or Preferences.
5 Select the settings appropriate for your project, and click OK.
print from your Macintosh notebook computer:
1 Connect one end of a USB cable to the notebook computer, then connect
the other end of the cable to the direct-printing port located on the front of
the printer. The direct-printing port is located to the left of the control panel
buttons.
2 Using your software application, open the file you want to print.
3 From the File menu of the software application, select Page Setup.
4 In the Format for pop-up menu, select photosmart 7200 series.
5 Select the page attributes:
– Select the paper size.
– Select whether you would like to print borderless or bordered photos.
If you are using OS 9, the borderless option appears as a check box. If
you are using OS X, the borderless options appear under the Paper
Size pop-up menus.
– Select the orientation.
– Enter the scaling percentage.
6 Click OK.
7 From the File menu in your software application, select Print.
The Print dialog box appears.
Note: If you are using OS X, the Copies & Pages panel opens. If you are
using OS 9, the General panel opens.
8 Select the print settings appropriate for your project. Use the pop-up menus
to open the other panels.
Note: To learn more about the settings, click the ? in the lower-left corner of
the dialog box (OS X only).
9 Click Print (OS X) or OK (OS 9) to begin printing.