HP ML100 - Manual (Page 61)

NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
System overtemperature condition •
Item See
1 Server maintenance and service guide, located on the Easy Set-up CD
or the HP website (http://www.hp.com/products/servers/platforms)
2 "Power-on problems flowchart (on page 55)"
3 "HP Insight Diagnostics (on page 40)"
4
• "Hardware problems (on page 62)"
• Server maintenance and service guide, located on the Easy Set-up
CD or the HP website
(http://www.hp.com/products/servers/platforms)
5 "HP contact information (on page 97)"
Troubleshooting 61