Installing an operating system, Installing a supported microsoft® windows® os, Installing a supported linux os – HP ML100 User Manual
Page 46
Installing an operating system
To stall an OS, download the SATA RAID dri
in
ver and create a driver diskette with the software and
ru
Installing a supported Microsoft® Windows® OS
conds to enable the system to recognize the controller. If the
inst ctions from the HP website
1.
Insert the OS CD and reboot the system.
2.
When prompted, press the F6 key to install a third-party driver.
NOTE:
Press F6 within 5 se
system fails to recognize the controller, restart this procedure.
3.
Insert the SATA RAID driver diskette created earlier. The system prompts the next action.
e diskette. Then, press the Enter key. The OS searches the
emaining on-screen instructions to complete the installation.
Installing a supported Linux OS
To install a supported Linux OS when using the HP Embedded SATA RAID controller, see the OS
documentation.
4.
Press the S key to specify the driver from th
diskette for a suitable driver.
5.
After locating the Adaptec Embedded Serial ATA HostRAID driver, press Enter.
6.
Follow the r
Software and configuration utilities 46