Installing dimms, Installing, Dimms – HP ML100 User Manual
Page 28
•
DIMM configuration on channel 1 and channel 2 of a processor must be identical.
In multi-processo
•
r configurations, each processor must have a valid Lockstep Memory configuration.
r may have a different valid Lockstep Memory
r Lockstep population order
For Lockst
e configurations with a single processor, populate the DIMM slots in the
follow g
•
I
D and E
e slots C or F.
•
n order
For L
de configurations with multiple processors, populate the DIMM slots for each
processor in t
g order:
•
MM
C or F.
•
o
s C or F.
se RBSU to configure the system for Lockstep memory support.
Installing
•
In multi-processor configurations, each processo
configuration.
Single-processo
ep memory mod
in order:
RD MM
o
First: A and B
o
Next:
o
Do not populat
UDIMM
o
First: A and B
o
Last: D and E
o
Do not populate slots C or F.
After installing the DIMMs, use RBSU to configure the system for Lockstep memory support.
Mult
ssor Lockstep populatio
i-proce
ockstep memory mo
he followin
RDI
o
First: A and B
o
Next: D and E
o
Do not populate slots
UDIMM
o
First: A and B
Last: D and E
o
Do not populate slot
After installing the DIMMs, u
DIMMs
CAUTION:
To avoid damage to the hard drives, memory, and other system components, the
air baffle, drive blanks, and access panel must be installed when the server is powered up.
1.
2.
rver from the rack.
llowing:
the bezel ("Remove the tower bezel (ML150 G6 servers)" on page 8).
Power down the server (on page 7).
For ML110 G6 servers, extend the se
3.
For ML150 G6 servers, do one of the fo
o
Unlock and remove
Hardware options installation 28