HP ML100 - Manual (Page 56)

NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty power supply
Power on circuit problem
Impr
• Fault
m
• Loose or faulty power cord
• Power source problem
•
•
operly seated component or interlock problem
y internal component
Ite See
1 Server maintenance and service guide, located on the Easy Set-up CD
products/servers/platforms) or the HP website (http://www.hp.com/
2 "General diagnosis flowchart (on page 53)"
3 "Loose connections (on page 50)"
4 "Power source problems (on page 63)"
5
• "Power supply problems (on page 63)"
• Server maintenance and service guide, located on the Easy Set-up
CD or the HP website
(http://www.hp.com/products/servers/platforms)
6 "System open circuits and short circuits (on page 73)"
Troubleshooting 56