Henny Penny PFE-592 - Manual (Page 11)

Model 590/592
Problem Cause Correction
PRESSURE SECTION (Continued)
Pressure does not • Not enough product in fryer • Place proper quantity of
build or product not fresh fresh product within
frypot to generate steam
• Metal shipping spacer not • Remove shipping spacer.
removed from dead weight See Unpacking Section of
Operator ’s Manual
• Lid open or not latched • Close and latch lid
• Solenoid valve leaking or • Check or clean solenoid
not closing valve per maintenance
section on the solenoid valve
• Dead weight valve leaking • Repair per maintenance section on
deadweight valve
• Pressure not programmed • Check programming
• Lid gasket leaking • Reverse gasket or lid needs
adjusted; see Reversing the Lid
Gasket and Lid Adjustment
Sections
• Safety relief valve leaking • Check and replace if necessary per
maintenance section on the safety
relief valve
• Pressure pad broken or crushed • Replace pressure pads
1103 1-7