Home Dynamix DW 3512 User Manual

Page 66

Dynamix DW 3512 Technical Manual V1.00

Step4: Go to the page of Wireless

Æ Basic Settings, set the mode to Client and set the

Network Type to Infrastructure.

Step5: Go to the page of Wireless

Æ Security, to set the necessary authentication method for

WISP Outdoor AP, if WISP Outdoor AP has enable authentication.

Step6: Go to the page of Wireless

Æ Site Survey to search and connect to WISP Outdoor AP.

When connection is OK, there should be a successful message appeared.

Step7: Go to the page of TCP/IP

Æ WAN to configure the IP settings.

Step8: Go to the page of Wireless

Æ Basic Settings, enable the “Enable Universal Repeater

Mode (Acting as AP and client simultaneouly)” and input the WISP Outdoor AP’s SSID.

Step9: If configuration ok, PCs of office LAN could send packets via WISP Outdoor AP. And

the Notebook of the DW3512’s WLAN should be also use WiFi to access internet via WISP

Outdoor AP.