Home Dynamix DW 3512 User Manual

Page 35

Dynamix DW 3512 Technical Manual V1.00

when PPPoE disconnect. If user set type as Connect on Demand, please set following

idle time, DW3512 will check connection after this time. If user set type as Manual,

DW3512 will only connect or disconnect by press Connect or Disconnect manually.

5) Idle Time: Set PPPoE connection idle time for Connect on Demand.

6) MTU Size: Set MTU (maximum transmission unit) size.

7) Attain DNS Automatically/Set DNS Manually: Select to attain DNS automatically from

server or user wants to set DNS manually.

8) DNS 1/DNS 2/ DNS 3: Set three alternative Domain Name Server manually for WAN

interface.

9) Enable UPnP: Check to enable UPnP function.

10) Enable Ping Access on WAN: If this function is checked to enable, user can reach

DW3512 via Ping WAN IP address.

11) Enable Web Server Access on WAN: If this function is checked to enable, user can enter

Web Server management of DW3512 through WAN IP address.

12) Enable IPsec pass through on VPN connection: check to enable IPsec function.

13) Enable PPTP pass through on VPN connection: check to enable PPTP pass through

function.

14) Enable L2TP pass through on VPN connection: check to enable L2TP pass through

function.