Home Dynamix DW 3512 User Manual

Page 22

Dynamix DW 3512 Technical Manual V1.00

1) WEP: When encryption WEP is selected, you must set WEP key value. Only user with the

same WEP key can connect to the DW3512.

•

Key Length: set WEP key length as 64 or 128 bits and select user to transmit data

using 64 or 128 bits WEP key encryption. 64 bits represents a lower level encryption

for security, and uses ASCII (5 characters) or Hex (10 characters) encryption

scheme as a secret key. 128 bits represents a higher level encryption for security,

and uses ASCII (13 characters) or Hex (26 characters) encryption scheme as a

secret key.

•

Key Format: set key format as ASCII (5 characters) or Hex (10 characters) for 64

bits encryption; ASCII (13 characters) or Hex (26 characters) for 128 bits encryption.

•

Default Tx Key: set default key as key 1, 2, 3, or 4. User can specify which of the

four keys to use for transmitting data over WLAN.

•

Encryption Key 1/2/3/4: user can set 4 sets of encryption keys. Keys 1-4 allow you to

easily change wireless encryption settings to maintain a secure network. WEP key is

either 5/10 or 13/26 ASCII/hexadecimal characters based on user select 64 or 128

bits key length.

2) WPA(TKIP): only user with the same WPA pre-shared key can connect to DW3512 and

transmit data using TKIP encryption.

•

Pre-Shared Key Format: Select Pre-Shared Key Format as Passphrase or Hex (64

characters).