Operation mode – Home Dynamix DW 3512 User Manual

Page 24

Dynamix DW 3512 Technical Manual V1.00

4) WPA2

Mixed

•

Pre-Shared Key Format: Select Pre-Shared Key Format as Passphrase or Hex (64

characters).

•

Pre-Shared Key: set pre-shared key manually.

Operation Mode

You can setup different modes to LAN and WLAN interface for NAT and bridging function. DW3512 provide all

3 primary modes and 4 extended modes. Here you can find 3 primary modes, including: 1) Gateway mode, 2)

Bridge mode, 3) Wireless ISP. Another 4 extended modes are changes from these 3 mainly modes and plus

some application, including: 1) Client mode, 2) WDS Repeater Mode, 3) Universal Repeater mode, 4) WISP +

Universal Repeater mode.

Gateway: In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The

NAT is enabled and PCs in four LAN ports share the same IP to ISP through WAN port. The

connection type can be setup in WAN page by using PPPOE, DHCP client or static IP.

Bridge: In this mode, all ethernet ports and wireless interface are bridged together and NAT

function is disabled. All the WAN related function and firewall are not supported

Wireless ISP: In this mode, all ethernet ports are bridged together and the wireless client will

connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to

ISP through wireless LAN. You must set the wireless to client mode first and connect to the ISP AP

in Site-Survey page. The connection type can be setup in WAN page by using PPPOE, DHCP

client or static IP.