Security – Home Dynamix DW 3512 User Manual

Page 28

Dynamix DW 3512 Technical Manual V1.00

Security

This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys

could prevent any unauthorized access to your wireless network.

Encryption: Set encryption as none, WEP, WPA, WPA2 or WPA2 Mixed.

Set WEP Key: When encryption WEP is selected, you must set WEP key value.

1) Key Length: Set WEP key length as 64 or 128 bits.

2) Key Format: Set key format as ASCII (5 characters) if you are using ASCII characters.

Select HEX if you are using hexadecimal numbers.

3) Default Tx Key: Set default transmit key as key 1, 2, 3, or 4.

4) Encryption Key 1/2/3/4: user can set 4 sets of encryption keys. Keys 1-4 allow you to

easily change wireless encryption settings to maintain a secure network. WEP key is

either 5/10 or 13/26 ASCII/hexadecimal characters based on user select 64 or 128 bits

key length.

10 hexadecimal digits or 5 ASCII characters are needed if 64 bit WEP is used; 26

hexadecimal digits or 13 ASCII characters are needed if 64 bit WEP is used

¾ Use 802.1x Authentication: Check to use Radius 802.1x authentication and select

authentication level as WEP 64 bits or 128bits. In this case, please set Authentication

RADIUS Server information.

¾ WPA Authentication Mode: Select WPA authentication mode as Enterprise (RADIUS) or

Personal (Pre-Shared Key). If user select Enterprise mode, please fill in Authentication

RADIUS Server information. If user select Personal mode, please select Pre-Shared key