Home Dynamix DW 3512 User Manual

Page 41

Dynamix DW 3512 Technical Manual V1.00

4) Busy Number: Enter the assigned number for busy forward.

5) No Answer Forward to: Check to enable no answer forward function. When phone is not

answered for a period of time, incoming call will be forwarded to assigned number.

6) No Answer Number: Enter assigned number for no answer forward.

7) No Answer Time (sec): Set no answer time. Once phone is not picked up after this time,

incoming call be will forwarded to assigned number.

¾ Speed

Dial

1) Position: Speed Dial access code. Press this speed dial number and followed by # can

dial out assigned phone number.

2) Name: Name of this speed dial.

3) Phone Number: Set phone number for Gateway to make speed dial.

4) Select: User can delete selected speed dial data.

¾ Dial

Plan

1) Replace prefix code: Select to enable (On) or disable (Off) prefix replace function.

2) Replace rule: Set prefix replace rule. Once user dial number matched prefix, Gateway will

replace the number with assigned number. Available parameters are “0~9”, “#”, “*”, “+”,

“x”. Symbol “+” means “or” , “x” could be numbers 0~9. For example, if user set Replace

rule as 002+009->005, which means if user dial 002 87654321 or 009 87654321, these

number will be dial out as 005 87654321.

3) Dial Plan: User can set how many digits or which number for Gateway to dial out

immediately. Available parameters are “0~9”, “#”, “*”, “+”, “x”. Symbol “+” means “or” ,

“x” could be numbers “0~9”. For example, user can set Dial Plan as “911+xxxxxxxx+*xx,

which means if user dial 911, 87654321, or *11, these number will be dial out immediately

without waiting for dial time or pressing # sign.

4) Auto Prefix: If user set Auto Prefix number, all number dialed out will be added with this

prefix number. Available parameters are “0~9”, “#”, “*”.For example, user set Auto Prefix

as 02, number 87654321 will be dial out as 02 87654321.

5) Prefix Unset Plan: User can set special access code to disable Auto Prefix function in

single call. Available parameters are “0~9”, “#”, “*”, “+”, “x”. Symbol “+” means “or” , “x”

could be numbers “0~9”. For example, if user set Prefix Unset Plan as *1+xxxxxxxxxx.

When dialed number as *1 87654321 or 10 digits of number, for this call will not be added

with Auto Prefix number.

¾ Codec

1) Precedence: Set codec priority sequence.

2) Rate: Set G.723.1 codec with 5.3 or 6.3k mode.

¾ T.38(FAX)

1) T.38: Check to enable T.38 function.