HP ProLiant DL145 - Manual (Page 64)

Operating System Installation and Software
HP ProLiant DL145 Server User Guide 5-9
Table 5-3: BIOS Setup Advanced Screen Menu Items continued
Primary Menu
Item Sub Menu Items Default Value Comments
Management
Processor
Configuration Management
Processor Status
Clear Management
Processor Event Log
View Management
Processor Event Log
Set Serial Port
Sharing Shared Refer to the “Server Management”
section in this chapter.
Not Shared Refer to the “Server Management
“section in this chapter.
Set LAN Configuration See Table 5-4, “LAN Configuration
Settings,” immediately following this
table.
Set PEF Configuration Disabled HP recommends this default setting.
Refer to the third-party IPMI Utilities
for further instructions.
Watch Dog Timer
Action Disabled Allows the Management Processor
to reset or power down the system if
the operating systems crashes or
hangs.
BIOS Serial
Console
Configuration BIOS Serial Console Enabled This option must be enabled for
BIOS redirection. For more
information, refer to “BIOS Console
Text Redirection” in this chapter.
Serial Port Address COM1
Serial Baud Rate 9600, 8, n, 1
Flow Control None
Redirection after BIOS
POST Disabled
Terminal Type VT100
Send Carriage Return Enabled
USB
Configuration Module Version
USB Devices Enabled None
USB Host Controllers Enabled
Legacy USB Support Enabled