HP RM500SL - Manual (Page 14)

0611 RM500SL User’s Guide Version 2.8 Page 14
2.7 External printer, auxiliary audio outputs
FastFacts 2.7: External printer, auxiliary audio outputs
3 General Operation
3.1 Section overview
FastFacts 3.1: General operation
The RM500SL is operated by using the built-in keypad, a USB QWERTY
keyboard (not included) or a USB computer mouse (not included). Any of these
pointing devices can be used to select items from menus, operate on-screen
buttons and to enter audiometric data. In addition, audiometric data printed in
barcode form by the RM500SL, the Verifit VF1 or some Grason-Stadler products,
may be scanned into the RM500SL.
This section covers the following topics:
3.2: Input device operation
3.3: Barcode data input
3.4: Keypad keys
3.5: Menus, lists and buttons
3.6: Screen messages
3.7: Program memory removal and replacement
3.8: Software updating
An external printer may be connected to the the USB port. It may be color or
black & white but it must be PCL3, PCL5 or PostScript compatible. The
external printer must first be selected in Setup. See
6: Printing and Storing Results
Auxiliary audio output jacks are not active with this version of software.
..In the European Community, if this device is connected to one or more
other devices to make a system, the CE mark on this device is only valid if the
other devices in the system carry a CE mark in respect of the Medical Device
Directive and if the supplier has stated that the requirements of the Medical Device
Directive will be met for this particular combination.