Hand Held Products 7200/UG - Manual (Page 52)

C H A P T E R 3 D O L P H I N 7 2 0 0 R F H A N D H E L D C O M P U T E R
52 52 52 52
F1 RF Setup
To configure the terminal for use in a local area network, press <F1> and enter the
data for each of the options on the screen shown below.
F1-RF Setup
F1 SET SECURITY ID
Press <F1> to set the Security ID. Enter a value for the Security ID option and press
<ENTER>.
The Security ID is a unique, 20 character alphanumeric string defined and configured
by the user. It must be identically configured in every radio intended to communicate
with others in the same network.
F2 R/W RADIO DOMAIN
Press <F2> to enter the Radio Domain. Once the Radio Domain is written, the
Dolphin 7200 RF terminal must be reset to activate the new Radio Domain.
The Domain is the area within a LAN that defines a region administered by an
access point. It is a software filter that does not affect the actual radio frequency
or the frequency hopping sequence. The Domain is a number between 0 and
15. It is the equivalent of a wireless subnet.
N O T E
Reset the Dolphin
terminal by pressing
and releasing the
<SHIFT>,
<ON/SCAN>
and <BKSP> keys.
All three keys must be
held down and released
at the same time.
N O T E
The Dolphin need
not be reset after
each configuration
change, but can be
done once all
configurations
changes have been
made.