Hand Held Products 7200/UG - Manual (Page 116)

C H A P T E R 8 U S I N G T H E D O L P H I N 7 2 0 0 C O M P A C T H O M E B A S E
116 116 116 116
When using right-angle style RS232 connector cable, the DIN rails may be mounted
directly to the wall. When using standard RS232 connector cables, it is recommended
that the rails be mounted to the wall using a 25mm (1 in.) spacer to allow for
appropriate strain relief of the cables (see figure 23).
In either case, after wall mounting, it is recommended that the cables be secured to
the DIN rail through use of a wire tie to prevent damage to the Compact HomeBase
unit in case accidental or excessive force is applied to the cables. (see figure 24)
Figure 23
Figure 24