Canon DP-V2421 4K Reference Display - Manual (Page 96)

96 OSD Menu
Item Setting Options (underline indicates factory default)
2020 Outside of Gamut
View When "ITU-R BT.2020" is selected for "Picture Mode" or "Color Gamut", displays video in
monochrome, with the areas where the color gamut exceeds the selected color gamut shown in red.
Note
• Cannot set when "Compare View" → "Enable" is "On".
Enable Switches between On and Off for "2020 Outside of Gamut View".
On, Off
Note
• "Enable" changes to "Off" when the power is turned on again.
Color Gamut Sets the "Color Gamut" to be set as out of color gamut.
ITU-R BT.709, Native
Range Sets the range when tinting dark areas. (1 increments)
0 to 512
0 : Tints all dark areas.
512 : Dark areas at the set values or less are not tinted.
Monochrome Video is displayed in monochrome.
On, Off
Note
• Cannot set when "Compare View" → "Enable" is "On".
• When the power is turned off and on, becomes "Off".
Blue Only Cuts red and green signals, and displays only blue signals in monochrome.
On, Off
Note
• "Blue Only" cannot be set when "CDL/User LUT" is a setting other than "CDL 1-8" or "Off".
• Cannot set when "Compare View"
→ "Enable" is "On".
• When the power is turned off and on, becomes "Off".
Red Off Video is displayed with red signals cut.
On, Off
Note
• Cannot set when "Compare View" → "Enable" is "On".
• When the power is turned off and on, becomes "Off".
Green Off Video is displayed with green signals cut.
On, Off
Note
• Cannot set when "Compare View" → "Enable" is "On".
• When the power is turned off and on, becomes "Off".
Blue Off Video is displayed with blue signals cut.
On, Off
Note
• Cannot set when "Compare View" → "Enable" is "On".
• When the power is turned off and on, becomes "Off".