Canon DP-V2421 4K Reference Display - Manual (Page 57)

57 OSD Menu
Item Setting Options (underline indicates factory default)
CDL/User LUT
Note
• When a setting other than "CDL 1-8" is selected, the following functions cannot be set.
- "Power", "Saturation", "Offset", "Slope", "Detail Settings", "Anchor CDL", "Reset CDL".
• When "ARRI (Rec2100-PQ-1K-100)" is selected, "HDR Range" → "SMPTE ST 2084 (PQ)"
settings become "1000".
• When "ARRI (Rec2100-HLG-1K-200)" is selected, "HDR Range" → "Hybrid Log-Gamma"
settings become "1000".
• Depending on the "User LUT" settings, "Color Gamut" and "Gamma/EOTF" will be the same
as set below.
User LUT Color Gamut Gamma/EOTF
ARRI (Rec2100-PQ-1K-100) ITU-R BT.2020 SMPTE ST 2084 (PQ)
ARRI (Rec2100-HLG-1K-200) ITU-R BT.2020 Hybrid Log-Gamma
VARICAM (V-Log to V-709) ITU-R BT.709 2.2
2020 PQ to 2020 SDR ITU-R BT.2020 2.4
2020 PQ to 709 SDR ITU-R BT.709
2020 HLG to 709 HLG ITU-R BT.709 —
2020 HLG to 709 SDR ITU-R BT.709 2.4
• "CDL/User LUT Bypass": Fixed at "Off" when "Picture Function Settings" → "Compare View"
→ "Enable" is set to "On".
Detail Settings Sets details for Picture Mode.
Peak Luminance
Control Controls the display luminance according to the brightness of the input image.
On, Off
Note
• When this is set to "On", the F button assigned with the "Peak Luminance Control" function
flashes when display luminance is restricted.
• It is not possible to set the function after selecting Picture Mode when the right screen is
selected. The right screen's setting will be the same as set for the left screen.
LUT Import You can import LUT. File names that can be imported can be up to 48 one-byte characters, including
alphabetical characters, numbers, and symbols (including file extensions).
Filename : Select a filename.
LUT Type (User LUT, Gamma LUT, Gamut LUT) : Select the LUT type.
Select LUT : Selects User LUT 1-8/Gamma LUT 1-8/Gamut LUT 1-8.
Base Color Gamut (SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native) : Selects the
color gamut used when creating the LUT (when "Gamut LUT" under "LUT Type" is selected).
Execute : Performs import.
LUT Name You can specify the name of LUT within one-byte 24 characters including alphabetical characters,
numbers, and symbols.
LUT Type (User LUT, Gamma LUT, Gamut LUT) : Select the LUT type.
Select LUT : Selects User LUT 1-8/Gamma LUT 1-8/Gamut LUT 1-8.
Input Name : Input the LUT name.
LUT Delete Deletes imported LUT.
LUT Type (User LUT, Gamma LUT, Gamut LUT) : Select the LUT type.
Select LUT : Selects User LUT 1-8/Gamma LUT 1-8/Gamut LUT 1-8.
Delete : Deletes LUT.