Canon DP-V2421 4K Reference Display - Manual (Page 104)

104 OSD Menu
Item Setting Options (underline indicates factory default)
Compatible Settings Sets compatibility with HDMI devices and operation of functions that differ according to the version
of the video display’s firmware.
HDMI Normal : All formats are supported.
Compatible 1 : Set this option when video is not played correctly in "Normal". HDR signals of a
luminance higher than that of the display main unit are not supported.
Compatible 2 : Set this option when video is not played correctly in "Normal" or "Compatible 1".
"4K50.00P/60.00P" and HDR signals are not supported.
Color Range Normal : Sets the "Color Range" setting to new types in firmware Version 1.2 or later for this video display.
Compatible : Sets the "Color Range" setting to conventional types in firmware Version 1.1 or earlier
for this video display.
Backlight
Control Normal : Increases HDR video visibility compared with the firmware earlier than Version 1.1.
Compatible : The displayed image is equivalent to that from firmware earlier than Version 1.1.
Reduce
Backlight Flash When "Adjustment" → "Backlight Control" is set to an option other than "Off", the screen may exhibit
a flash in cases such as switching between scenes with a large difference in luminance. You can use
"Reduce Backlight Flash" to reduce this phenomenon.
On, Off
User LUT
Normal : Information display for videos such as waveform monitors depends on the status following
application of User LUT.
Compatible : Information display for videos such as waveform monitors depends on the status
before application of User LUT
Note
• When "Picture Function Settings" → "Compare View" → "Enable" is set to "On", fixes as
"Normal".
Firmware/License Update This function is used to update the video display firmware. Refer to the Canon website for detailed
information.
Export/Import Sets the export/import main menu settings.
Note
• The following settings cannot be exported or imported.
Adjustment Target values of Calibration (including calibration results)
Display Settings Zoom Preset, Frame Hold
Picture Function
Settings Peaking (Enable), False Color (Enable), Over Range (Enable),
2020 Outside of Gamut View (Enable), Test Pattern, Monochrome,
Blue Only, Red Off, Green Off, Blue Off, Compare View (Enable)
Network/IMD
Settings LAN, Wi-Fi, Display Setting Link
(LAN and Wi-Fi: only export/import via network)
System Settings Date/Time, Fan Stop, Export/Import, Power on Setting
• User LUT data cannot be exported or imported to "User 1-3" under "Target".
• Data exported from this product may not be imported to products of which firmware version
is earlier than the version of this product. To import data, update the firmware to the latest
version.