Canon DP-V2421 4K Reference Display User Manual

Page 65

OSD Menu

Item

Setting Options

Image Division

Sets the display method when "Input Configuration" is set to "3G/HD-SDI (

12-3G/HD-SDI)"

and "Select Input Signal" is set to "Quad Input" or "Dual Input." Two division methods "Square
Division" and "2 Sample Interleave" are supported for 4K video signals.

■

"Quad Input"

Automatic

: Automatically determined based on payload and displayed.

Square Division

: Displays a signal transmitted over four inputs as a single image.

2 Sample Interleave

: Displays a signal transmitted divided into a 2K/HD signal as a single image.

Multi View (Quad)

: Displays the video of each of the four inputs in four screens.

■

"Dual Input A,B" or "Dual Input C,D"

Automatic

: Automatically determined based on payload and displayed.

Square Division

: Displays a signal transmitted over four inputs as a single image.

2 Sample Interleave

: Displays a signal transmitted divided into a 2K/HD signal as a single image.

Dual Link 3G-SDI

: Displays a Dual Link 3G-SDI signal as a single image.

Multi View (Dual)

: Displays the video of each of the two inputs (Input A,B or Input C,D) in two

screens.

Select Input Signal: Quad Input, Image Division: Square Division

Note

•

The combinations of video signal formats that can be displayed when using two

screens or four screens in "Multi View (Quad)" or "Multi View (Dual)" are as follows:

Resolution combinations: Same, or "4096x2160, 2048x1080", "3840x2160,
1920x1080"

When using a frame rate and I/P/PsF combination that is one of
"23.98P / 24P / 25P / 29.97P / 30P"
"I (All) / PsF (All) / 47.95P / 48P / 50P / 59.94P / 60P"

(Quad screen display only) For both left and right, when the top and bottom screen video
signal frame rates and I/P/PsF are the same

• There may be periodical deterioration in the image when inputting signals with differing frame

rates or I/P/PsF.

Link Order

Automatically detects and displays correct terminal order based on payload when using "2 Sample
Interleave" or "Dual Link 3G-SDI".

Automatic, Off