Canon DP-V2421 4K Reference Display - Manual (Page 64)

64 OSD Menu
Channel Settings
This menu is used for input related settings. Select the "Select Channel" and choose a channel number from CH1 to
CH30. Finally define the parameter of each of the "Channel Settings".
 Supported Signal Format ( 112)
Item Setting Options
Select Channel Display the channel number. In addition, you can assign each content of "Channel Settings" to each
channel (
33).
CH1 to CH30
Note
• It may take 5 seconds when switching channels.
Input Configuration Select the input. Factory default depend on the channel ( 69).
3G/HD-SDI, 3G-SDI RAW, SD-SDI, HDMI, — (Not set)
12G-3G/HD-SDI, 3G-SDI RAW, SD-SDI, HDMI, — (Not set)
Select Input Signal Sets the signal display method ( 19).
Automatic : The display method is automatically determined to match the input signal.
Quad Input : Four input signals (Input A to Input D) are displayed.
Dual Input A,B : Two input signals (Input A terminal and Input B terminal) are displayed.
Dual Input C,D : Two input signals (Input C terminal and Input D terminal) are displayed.
Single Input A, Single Input B, Single Input C, Single Input D : One input signal (any of Input A
to Input D) is displayed.
Note
• Settings that can be set differ according to the input signal.
- SD-SDI: Only "Single Input A" to "Single Input D" can be selected.
- HDMI: This is fixed to "Automatic".