Canon DP-V2421 4K Reference Display - Manual (Page 95)

95 OSD Menu
Item Setting Options (underline indicates factory default)
Range - SDR Sets the upper limit for the SDR area.
False Color 1 (On, Off), False Color 2 (On, Off)
When "On" is selected, sets the size of the area to be colored. (increments of 10)
Monochrome/Brown : 10 to 190 ( 90 *) ( 40 )
Brown/Monochrome : 20 to 200 ( 100 *) ( 80 )
* Wh e n " H D R / S D R Bor d er " is " 1 00"
Range - HDR Sets the tint color range.
False Color 1 (Automatic, Automatic (Over Range), Manual), False Color 2 (Automatic,
Automatic (Over Range), Manual)
Automatic
: Sets the upper limit automatically in accordance with the "Gamma/EOTF" settings.
When "Manual" or "Automatic (Over Range)" is selected, sets the size of the area to be colored.
SMPTE ST 2084 (PQ) : The settings are as follows. (100 to 1000: 10 increments, 1000 to 4000:
100 increments, 4000 to 10000: 1000 increments)
Blue/light blue: 250 (150*) to 400
Light blue/green: 400 to 1000
Green/yellow: 600 to 4000
Yellow/orange: 800 to 8000
Orange/red: 1000 to 10000 (Only when using "Manual")
Hybrid Log-Gamma : The settings are as follows. (10 increments)
Blue/light blue: 250 (150*) to 300
Light blue/green: 300 (200*) to 500
Green/yellow: 400 (300*) to 700
Yellow/orange: 500 (400*) to 900
Orange/red: 600 (500*) to 1000 (Only when using "Manual")
* Wh e n " H D R / S D R Bor d er " is " 1 00"
Over Range Displays video in monochrome, with the areas where the set range is exceeded are shown tinted.
Note
• Cannot set when "Compare View" → "Enable" is "On".
Enable Switches the "Over Range" On, Off.
On, Off
Note
• "Enable" changes to "Off" when the power is turned on again.
Range (HDR) Automatic : When "Gamma/EOTF" → "SMPTE ST 2084" or "Hybrid Log-Gamma", only the areas
that exceed the "HDR Range" setting are tinted.
Manual : Only areas that exceed the range set at "SMPTE ST 2084 (PQ)" or "Hybrid Log-Gamma"
are tinted.
When you select "Manual", sets the reference level.
SMPTE ST 2084 (PQ) : Sets the tint color range. (100 to 1000: 10 increments, 1000 to 4000: 100
increments, 4000 to 10000: 1000 increments)
100 to 10000 (1000)
Hybrid Log-Gamma : Sets the tint color range. (10 increments)
100 to 1000 (1000)
Range (SDR) Sets the tint color range. (1 increments)
512 to 1023 (940)