Canon DP-V2421 4K Reference Display - Manual (Page 83)

83 OSD Menu
Item Setting Options (underline indicates factory default)
Select Signal Sets the waveform to be displayed.
Y, Cb, Cr, R, G, B
Display Type Sets the display type. When "Line" is selected, data for one line is displayed.
All, Line
Selects the line to be displayed when "Line" is selected.
Select Line: 1 to 2160
Scale Sets the scale of the wave form monitor.
Automatic : Sets in accordance with the "Gamma/EOTF" and "Color Range" settings.
IRE, ST 2084 (PQ) Full, ST 2084 (PQ) Limited, Hybrid Log-Gamma, Canon Log, Canon Log
2, Canon Log 3, S-Log2, S-Log3, ARRI (Rec2100-PQ-1K-100), ARRI (Rec2100-HLG-1K-200)
:
Select the scale.
Reference Line A guide is displayed at the specified position. "Reference Line" is not displayed when "1023" is
selected.
4 to 1023
Reference Level Sets the range of the reference level. Tints the outside of the range of the reference level.
• In the case of "Gamma/EOTF" corresponding to the HDR range, parts that exceed the HDR range
are tinted.
• When "Color Range" → "Limited", outside the limited range is tinted.
Automatic : Sets in accordance with the "Gamma/EOTF" and "Color Range" settings.
Manual : When you select "Manual", sets the reference level.
Reference Level High : Sets the reference display level (high). "Reference Level High" is not
displayed when "1023" is selected.
468 to 1023
Reference Level Low : Sets the reference display level (low). "Reference Level Low" is not
displayed when "0" is selected.
0 to 468
Color Sets the signals to be displayed and the color of signals exceeding the reference level.
Y, Cb, Cr, R, G, B : Selects the signal.
Selects the color of the selected signal.
White, Red, Green, Blue, Yellow, Cyan, Magenta
Default value of each signal is shown below.
Y (White), Cb (White), Cr (White), R (Red), G (Green), B (Blue)
Reference Level High, Reference Level Low : Selects the reference level.
White, Red, Green, Blue, Yellow, Cyan, Magenta
Default value of each reference level is shown below.
Reference Level High (Magenta), Reference Level Low (Cyan)
Brightness Sets the Brightness of the wave form monitor.
Automatic : Brightness is automatically adjusted according to the contrast value and average
brightness value of the input signal.
Normal, Low
Position Selects the display position.
Bottom Left, Bottom Right
Note
• This setting becomes invalid in the "Multi View (Dual)" display.
Size Sets the size of the display.
Large, Middle, Small