Canon DP-V2421 4K Reference Display User Manual
Page 59
59
OSD Menu
Item
Setting Options (underline indicates factory default)
Calibration
Performs calibration based on set target values when "User 1-7" is selected for "Picture Mode".
Luminance
: Sets the target luminance.
48
to
500 (100)
cd/m
2
Color Temperature
: Sets the target color temperature.
D93, D65, D61, D60, D56, D50, DCI-P3
: Select from preset color temperatures.
Custom (xy)
: You can adjust CIE x, y in increments of 0.001.
x: 0.260
to
0.360 (0.313)
/
y: 0.260
to
0.360 (0.329)
Color Gamut
: Sets the color gamut.
SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3
Gamma
: Sets the target gamma.
2.2, 2.35, 2.4, 2.6, ITU-R BT.1886
Start
: Performs calibration.
Note
• When "Luminance" is set to high brightness, it may be calibrated beyond the brightness
adjustment range and set lower than the target value, depending on the "Color Temperature"
setting. In that case, set the "Luminance" again.
• Calibration cannot be executed in "Picture Mode" for the right screen.
HDMI Link
When "User 1-7" is selected for "Picture Mode", video is displayed at the image quality linked to the
video image quality setting using the HDMI metadata.
Automatic Adjustment
On, Off
Color Gamut/Gamma/EOTF
: Matches the "Color Gamut" and "Gamma/EOTF" settings of the
video display with the HDMI metadata.
On, Off
Contrast/HDR Range
: Matches the "Contrast" and "HDR Range" setting of the video display with
the HDMI metadata.
On, Off
Backlight Control
: Matches the brightness setting of the video display with the HDMI metadata.
Peak luminance priority
: Operates if "Peak Luminance Control" is "On" even when the
average luminance of HDMI metadata is high.
Average luminance priority
: Operates if "Peak Luminance Control" is "Off" when the
average luminance of HDMI metadata is high.
Off
Note
• Parameter of HDMI metadata and Video Display
HDMI metadata
Video display setting
Color Gamut
BT.709
ITU-R BT.709
BT.2020
ITU-R BT.2020
Gamma/EOTF
Traditional SDR
2.2
PQ
PQ
Hybrid Log-Gamma
Hybrid Log-Gamma
• Cannot set "HDMI Link" when "Channel Settings"
→
"Picture Mode"
→
"Type" is "L/R".