Canon DP-V2421 4K Reference Display - Manual (Page 66)

66 OSD Menu
Item Setting Options
Format Sets the color format and gradation.
■ SDI Signal
Automatic, 4:2:2 YCbCr 10-bit, 4:2:2 YCbCr 12-bit, 4:4:4 YCbCr 10-bit,
4:4:4 YCbCr 12-bit, 4:2:2 ICtCp 10-bit, 4:2:2 ICtCp 12-bit, 4:4:4 ICtCp 10-bit,
4:4:4 ICtCp 12-bit, 4:4:4 RGB 10-bit, 4:4:4 RGB 12-bit, 4:4:4 XYZ 10-bit, 4:4:4 XYZ 12-bit
■ HDMI Signal
Automatic, 4:4:4 XYZ 12/10-bit
Note
• The HD-SDI signal is either "4:2:2 YCbCr 10-bit" or "4:2:2 ICtCp 10-bit".
• "SD-SDI" is fixed to "4:2:2 YCbCr 10-bit".
• For "3G-SDI RAW", the setting is fixed to "Automatic".
• The settings for correctly displaying ICtCp format signals are as follows.
- "Picture Mode": "ITU-R BT.709" or "ITU-R BT.2020"
- "Color Gamut": "ITU-R BT.709" or "ITU-R BT.2020"
- "Gamma/EOTF": "SMPTE ST 2084 (PQ)", "Hybrid Log-Gamma" or "Hybrid Log-Gamma
RGB"
• If you need to use the ICtCp format for SDI signals, select any of the following to match the
signal: "4:2:2 ICtCp 10-bit", "4:2:2 ICtCp 12-bit", "4:4:4 ICtCp 10-bit", "4:4:4 ICtCp 12-bit"
• If "Automatic" is selected, they are rendered in a Payload that is selected in the order A → B →
C → D.
• To use 4:4:4 XYZ 10-bit for SDI signals, select "4:4:4 XYZ 10-bit". Then, signals will be
processed as signals where XYZ data is included in RGB data output in 4:4:4 RGB 10-bit
format.
Audio Input Sets the audio terminal. Terminals that can be selected differ according to the setting of "Select Input
Signal."
When "Quad Input":
Automatic, Input A, Input B, Input C, Input D
When "Dual Input A,B": Automatic, Input A, Input B
When "Dual Input C,D": Automatic, Input C, Input D
Automatic : Sets automatically to match the input signal.
Note
• This setting is fixed at "Automatic" when "Select Input Signal" is "Automatic" or "Single Input".
Marker/TC/CameraInfo
Input Set the target terminal so that various markers (except Grid Marker), Time Code, and Camera
Information are displayed. (Camera Information is available in the "Multi View (Quad)" display only)
When "Automatic" or "Quad Input":
Input A, Input B, Input C, Input D
When "Dual Input A,B": Input A, Input B
When "Dual Input C,D": Input C, Input D
Note
• This setting becomes invalid except for the "Multi View (Quad)" or "Multi View (Dual)" display.
Internal Sync Sets whether to synchronize four inputs when "Square Division" is selected.
On : Force synchronization.
Off : Do not force synchronization.