Canon DP-V2421 4K Reference Display - Manual (Page 85)

85 OSD Menu
Item Setting Options (underline indicates factory default)
Color Automatic : Unless "Picture Function Settings" → "False Color" → "Enable" is set to "Off", it will
automatically adjust the display to match the "False Color" settings.
Normal : Displays in monochrome.
False Color : When "Gamma/EOTF" is set to "SMPTE ST 2084 (PQ)" or "Hybrid Log-Gamma", then
it will adjust the display to match the "False Color" settings.
When "False Color"
→ "Enable" is "False Color 1" or "Off": Match the "False Color 1" settings.
When "False Color" → "Enable" is "False Color 2": Match the "False Color 2" settings.
Gain Increases the displayed graph size.
x1, x2, x3
HDR Range On : Areas that exceed the HDR range will be tinted.
On (Clip) : Areas that exceed the HDR range and areas that exceed the HDR range and are clipped
will be tinted.
Off : Areas that exceed the HDR range will not be tinted.
HDR/SDR Ratio Switches between displaying or not displaying the "HDR/SDR Ratio" when "Gamma/EOTF" is set to
"SMPTE ST2084 (PQ)" or "Hybrid Log-Gamma". The ratio calculation for HDR/SDR uses the "False
Color"
→ "HDR/SDR Border" settings.
On, Off
Peak/Ave.
Luminance Switches between displaying or not displaying the "Peak/Ave. Luminance" when "Gamma/EOTF" is
set to "SMPTE ST2084 (PQ)" or "Hybrid Log-Gamma".
On, Off
Size Sets the size of the display.
Large, Small
Note
• Fixed to "Small" during "Single Input Dual View".