Canon DP-V2421 4K Reference Display User Manual
Page 82
82
OSD Menu
Item
Setting Options (underline indicates factory default)
Audio Level Meter
Configures various settings for the audio level meter. Displays the audio level of the selected channel
number.
When using dual or quad screens, setting "Channel Settings"
→
"Audio Input" to "Automatic"
will display multiple audio level meters. You can display up to eight channels on the screen overall.
Note
• Settings of the video display that cannot be displayed, or input signal status (
)
•
When "Channel Settings"
→
"Audio input" is set to "Automatic":
-
When displaying as "Multi View (Quad)", "Channel No." becomes "2CH".
-
When displaying as "Multi View (Dual)", "Channel No." becomes "4CH".
Enable
Switches the audio level meter On, Off.
On,
Off
Channel Number
(SDI)
Sets the number of channels displayed when SDI signal is input. Options change according to the
setting for "SDI Group" under "Audio Settings".
When "CH1-CH8" is selected for "SDI Group":
2CH
(CH1-CH2)
, 4CH
(CH1-CH4)
,
6CH
(CH1-CH6)
, 8CH
(CH1-CH8)
,
8CH (1-4, 5-8)
(CH1-CH8)
When "CH9-CH16" is selected for "SDI Group":
2CH
(CH9-CH10)
, 4CH
(CH9-CH12)
,
6CH
(CH9-CH14)
, 8CH
(CH9-CH16)
,
8CH (1-4, 5-8)
(CH9-CH16)
Note
• When "Channel Number (SDI)" is set to "8CH (1-4, 5-8)", if "Size" is set to "Large", the
resulting display will be the same as for "8CH".
Channel Number
(HDMI)
Sets the number of channels displayed when HDMI signal is input.
2CH
(CH1-CH2)
, 4CH
(CH1-CH4)
, 6CH
(CH1-CH6)
, 8CH
(CH1-CH8)
Size
Sets the size of the display.
Large, Middle, Small
Peak Hold
When set to "On", one second of audio signal at the peak is kept.
On, Off
Reference Level
Sets the reference level.
-40
to
0 (-20)
Brightness
Sets brightness for the audio level meter.
Normal, Low, Half
Wave Form Monitor
Configures various settings for the wave form monitor. On the wave form monitor, the horizontal axis
shows the horizontal resolution of the video and the vertical line shows the signal level. To the right of
the wave form monitor, "Color Range" and "HDR Range" information (vertical line) is displayed.
1023
-4%
0%
50 %
100 %
0
Signal level
IRE
Horizontal resolution of video
Note
• Settings of the video display that cannot be displayed, or input signal status (
)
Enable
Switches the wave form monitor On, Off.
On, Off