beautypg.com

Step four: parts return – HP LaserJet Enterprise M806x+ Black and White Laser Printer User Manual

Page 60

background image

4.

If you are installing an optional accessory for the first time, at the back of the product remove the

accessory interface cable cover.

5.

Connect the finishing accessory interface cable.

6.

Connect the product power cord, and then turn on the product.

Step four: Parts return

The following URL provides information on how to return parts to HP for reuse and recycling:

Product return

and recycling

NOTE:

HP recommends responsible disposal of the defective stapler/stacker.

Step five: Configure the booklet maker in the HP Embedded Web Server (EWS)

1: Connect to the EWS

2: Configure the Paper Selection feature

3: Configure the Sides feature for single or duplex printing

52

Chapter 2 Install and configure the finishing accessories

ENWW