beautypg.com

Step six: configure the default staple location – HP LaserJet Enterprise M806x+ Black and White Laser Printer User Manual

Page 53

background image

Stapler/Stacker Settings

Hole Punching

3.

Select a hole punch location from the list of options, and then touch the

Save

button. The following hole

punch options are available for either a 2/3 Hole Puncher or 2/4 Hole Puncher:

Hole punch location

2/3 Hole Puncher

2/4 Hole Puncher

None

Two left or top

Two left

Two right

Two top

Two bottom

Three left

Three top

Three right

Three top

Three left or top

Four left

Four right

Four top

Four left or top

NOTE:

Not all options are available. Available options depend on whether the hole punch accessory is

a 2/3 or 2/4 hole puncher.

NOTE:

To use the hole puncher, load Letter or A4-size paper with the long edge of the paper along the right

edge of the tray (long-edge feed).

Step six: Configure the default staple location

1.

From the Home screen on the product control panel, scroll to and touch the

Administration

button.

2.

Open the following menus:

Stapler/Stacker Settings

Stapling

3.

Select a staple location from the list of options, and then touch the

Save

button. The following staple

options are available:

None

Top left

ENWW

Install or replace a stapler/stacker or stapler/stacker with hole punch accessory for the HP LaserJet

Enterprise M806 and HP LaserJet Enterprise flow MFP M830

45