HP LaserJet Enterprise M806x+ Black and White Laser Printer - Manual (Page 116)

Aa
123
◦ Landscape document orientation
Aa
123
● Finishing: staple, hole punch, or both
Some output device options are not supported and are indicated as such in the device output options tables.
Some drivers will not allow these supported choices to be selected in the driver. For options that are not
supported, the job will print but no output paper handling, such as hole punch or staple, will be performed.
NOTE: The following tables are examples of supported features.
Hole punch only output options
2 Hole punch
The following hole punch option tables by paper size for the HP LaserJet Enterprise M806 and HP LaserJet
Enterprise flow MFP M830 applies to these devices:
● HP Stapler/Stacker with 2/3 Hole Puncher — Mailbox Mode — CZ995A
● HP Stapler/Stacker with 2/3 Hole Puncher — Stacker Mode — CZ995A
● HP Stapler/Stacker with 2/4 Hole Puncher — Mailbox Mode — CZ996A
● HP Stapler/Stacker with 2/4 Hole Puncher — Stacker Mode — CZ996A
The following hole punch option tables by paper size for the HP Color LaserJet Enterprise M855 and HP Color
LaserJet Enterprise flow MFP M880 applies to these devices:
● HP Stapler/Stacker with 2/4 Hole Puncher — Mailbox Mode — A2W82A
● HP Stapler/Stacker with 2/4 Hole Puncher — Stacker Mode — A2W82A
● HP Booklet Maker/Finisher with 2/3 Hole Puncher — Mailbox Mode — A2W84A
● HP Booklet Maker/Finisher with 2/3 Hole Puncher — Stacker Mode — A2W84A
108 Chapter 4 How to use the hole punch (optional finishing accessory) ENWW