HP LaserJet Enterprise M806x+ Black and White Laser Printer - Manual (Page 38)

HP Color LaserJet Enterprise flow MFP M880 1100 W 80 W 8.0 W 1.2 W 0.4 W
1 Values subject to change.
2 Power reported is highest value measured for all product models using standard voltages.
3 Default time from Ready mode to Sleep = 15 minutes
4 Speed is 46 ppm A4 size and 45 ppm Letter-size.
Electrical specifications
110-volt input voltage: 110 to 127 VAC (+/- 10%), 60 Hz (+/- 2 Hz), 10.5 A
220-volt input voltage: 220 to 240 VAC (+/- 10%), 50 Hz (+/- 2 Hz), 5.5 A
CAUTION: Power requirements are based on the country/region where the product is sold. Do not convert
operating voltages. This will damage the product and void the product warranty.
Acoustic emissions
HP Color LaserJet Enterprise flow MFP M880 1
Sound power level
Printing (46 ppm)
Copying (46 ppm)
Ready
Declared per ISO 9296
L
WAd
= 7.0 Bels (A) [70 dB(A)]
L
WAd
= 7.2 Bels (A) [72 dB(A)]
L
WAd
= 5.0 Bels (A) [50 dB(A)]
Sound pressure level - Bystander position
Printing/Copying (56 ppm)
Ready
Declared per ISO 9296
L
pAm
= 54 dB(A)
L
pAm
= 33 dB(A)
1 Acoustic values are subject to change. Configuration tested: HP Color LaserJet Enterprise flow MFP M880, printing on A4-size paper
at 46 ppm in simplex and duplex mode.
Operating-environment range
Table 1-20 Operating-environment range
Environment Recommended Allowed
Temperature 17° to 25°C (62° to 77°F) 15° to 30°C (59° to 86°F)
Relative humidity 30% to 70% relative humidity (RH) 10% to 80% RH
Altitude Not applicable 0 to 3048 m (0 to 10,000 ft)
30 Chapter 1 Finishing accessory overview ENWW