Nikon D780 DSLR Camera (Body Only) User Manual
Page 927
881
AF-S NIKKOR 24–120mm f/4G ED VR Lens Manual
D
Using Vibration Reduction: Notes
•
When using vibration reduction, press the shutter-release button
halfway and wait for the image in the viewfinder to stabilize before
pressing the shutter-release button the rest of the way down.
•
When vibration reduction is active, the image in the viewfinder may
jiggle after the shutter is released, but this does not indicate a
malfunction.
•
Slide the vibration reduction mode switch to
NORMAL
for panning
shots. In
NORMAL
mode, vibration reduction applies only to motion
that is not part of a pan. If the camera is panned horizontally, for
example, vibration reduction will be applied only to vertical shake.
•
Do not turn the camera off or remove the lens while vibration reduction
is in effect. If power to the lens is cut while vibration reduction is on, the
lens may rattle when shaken, but this does not indicate a malfunction.
The rattling will end when the lens is reattached and the camera turned
on.
•
If the camera is equipped with a built-in flash, vibration reduction will
be disabled while the flash charges.
•
In the case of cameras equipped with an AF-ON button, vibration
reduction will not be performed when the button is pressed.
•
Select
OFF
when the camera is mounted on a tripod. Note, however,
that
ON
is recommended if the tripod head is unsecured or the camera
is mounted on a monopod.