Christie M Series WU14K-M WUXGA 3DLP Projector (No Lens) - Manual (Page 78)

Channel Group Name Description Default
Value Notes
120 to 129 Slot 3, Input 1
—
170 to 179 Slot 3, Input 6
180 to 189 Slot 4, Input 1
—
230 to 239 Slot 4, Input 6
15 Image Image
Freeze 0-85 Unfreeze image
172-255 Freeze Image 0
16 Lamps/
Power Power 0-85 Power Off (Switch lamps
off, cool lamps down and go to
Standby mode)
172-255 Power On (Switch
lamps on, warm up mode) 128 A five second timer is used
before executing a power
state change. If the slider
moves out of the On/Off
range within the five
seconds, the timer is
cancelled.
Does not change power stat
on default.
17 Image Size 0 to 255 Scaled as % of total
control range, which is 200 to
4000 67
18 Image Vertical
Stretch 0 to255 Scaled as % of total
control range, which is 200 to
3000 91
19 Setup
Functions Projector
Orientation 0-49 Front Projection
50-99 Rear Projection
100-149 Front Projection
Inverted
150-199 Rear Projection
Inverted 255 Does not change projector
orientation on default.
20 Setup
Functions On Screen
Display 0-85 OSD Off
172-255 OSD On 128 Does not change OSD on
default.
21 Setup
Functions Lens
Calibrate 172-255 Run calibration 0 Locked by channel
“Lens shift enable”
22 Setup
Functions Lamp Power Scaled as % of total control
range.
Examples are given for 350W
lamps:
0 0% 300 Watt
—
127 50% 335 Watt
—
255 100% 370 Watt 255 Depends on what lamps are
used, power rating may be
different scale.
DMX/ArtNET
M Series User Guide 78
020-101948-02 Rev. 1 (08-2018)
Copyright © 2018 Christie Digital Systems USA, Inc. All rights reserved.