Christie M Series WU14K-M WUXGA 3DLP Projector (No Lens) - Manual (Page 57)

Event Message
(Email
Notification) Parameters Trap Config.
Menu Text Default
Notification
Setting
Description
Lamp fault cleared Lamp fault has
been cleared Lamp Number
Fan stall Fan stalled Fan Name Fan Stall
Fan no longer
stalled Fan stall cleared
Thermal sensor
warning Thermal sensor
warning Thermal Sensor
Name
Thermal Sensor
Text Thermal Sensors
Thermal sensor
error Thermal sensor
error
Thermal sensor OK Thermal sensor OK
Projector powered
on (Standby to
Lamps On) Projector turned on
(lamps on) None Power Disabled
Projector powered
off (Lamps On to
Standby) Projector turned off
(lamps off)
No video input
signal No video input
signal Frequency Signal Lost/
Detected
Video input signal
detected Video input signal
detected
Lamp door open Lamp door has
been opened Lamp Number Lamp Door
Lamp door closed Lamp door has
been closed
5. Configure the Email notification.
When a trap occurs while email notification is selected for the event, an individual email is sent
to each user defined email recipient. The SNMP menu allows up to three email address (up to
64 characters in length) to request notifications from the system during a trap event.
The resulting email is in the following format:
From: <[email protected]>
To: <[email protected]>
Subject: Christie M Series Projector SNMP Notification
Message:
Projector Name:
Location:
IP Address:
Description:
Parameters: = ; = ; ...
Monitoring and maintaining the projector
M Series User Guide 57
020-101948-02 Rev. 1 (08-2018)
Copyright © 2018 Christie Digital Systems USA, Inc. All rights reserved.