Christie M Series WU14K-M WUXGA 3DLP Projector (No Lens) - Manual (Page 36)

• No resizing—Displays the image in its native resolution, which may or may not match the
resolution of the projector. For example, for a source with a native resolution of 800 x 600,
No Resizing in an SXGA+ projector uses the central 800 x 600 pixels and have a black
border. The black border areas are unused areas.
• Full size—Uses all pixels for displaying the image, regardless of source or original aspect
ratio. Incoming source material having a different aspect ratio than the projector is
stretched for display.
• Full width—Fills the display from left-to-right without changing the original aspect ratio of
the image. Depending on the source, data at the top and bottom may be discarded
(cropped), or the display may have black borders at the top and bottom (called “letter
boxed”).
• Full height—Fills the display from top-to-bottom. Depending on the source, this may
create borders.
• Anamorphic—Displays an anamorphic image in its native 16:9 aspect ratio. The image
fills the screen from side-to-side and be centered between black bars at top and bottom.
Resizing and positioning the image
Change the size and location of the image.
1. Select Size and Position.
2. To control both the image width and height in tandem, maintaining the current aspect ratio of
the displayed signal data, adjust the Size.
Adjusting the image
M Series User Guide 36
020-101948-02 Rev. 1 (08-2018)
Copyright © 2018 Christie Digital Systems USA, Inc. All rights reserved.