Christie M Series WU14K-M WUXGA 3DLP Projector (No Lens) User Manual

Page 30

named User 1, 2, 3 or 4—can be applied or disabled for a source at any time throughout a bank of
adjacent displays, simplifying both the setup and maintenance of a seamless wall.

1. Set up and optimize all projector settings.

You can ignore color temperature, since you are redefining color performance in this
procedure, but do optimize each projector in every other aspect. Closely align all screen edges.

2. Assign projector numbers to make communications easier.
3. Use the same lamp mode for all projectors, and do the following:

a) Set Select Color Adjustment to Max Drives.
b) Display a full white test pattern.
c) Adjust lamp power and optical aperture until adjacent white fields appear the same

brightness.

d) Display the Color Adjustments by X,Y menus for all projectors.

Each menu shows the x/y coordinates defining the Max Drives color gamut for this
projector.

e) Record the color adjustment values from one projector.

4. Create a User color adjustment for the other projectors in the array using the color adjustment

values recorded in step 3e.

5. In each projector, adjust x/y coordinates slightly.

•

To match reds, decrease Red X until full field red screens match.

•

To match greens, decrease Green Y until full field green screens match.

•

To match blues, increase both Blue X and Blue Y until full field blue screens match.

Using multiple projectors

M Series User Guide

020-101948-02 Rev. 1 (08-2018)