Christie M Series WU14K-M WUXGA 3DLP Projector (No Lens) - Manual (Page 7)

Introduction
This manual is intended for professionally trained operators of Christie high-brightness projection
systems.
Only Christie qualified technicians who are knowledgeable about the hazards associated with
highvoltage, ultraviolet exposure, and the high temperatures generated by the projector lamps are
authorized to assemble, install, and service the projector.
For complete M Series product documentation and technical support, go to www.christiedigital.com.
Projector overview
The M Series is a family of high resolution video/graphics three chip 1080p HD, SXGA+, and WUXGA
projectors. These projectors are based on next generation DLP ™ technology provided by Texas
Instruments.
The projector accepts data/graphics and video input signals for projection onto front or rear screens.
Light is generated by dual mercury lamps, then modulated by three Digital Micro-mirror Device (DMD)
panels that provide digitized red, green or blue color information. Light from the ON pixels of each
panel is reflected, converged, and then projected to the screen through a single front lens, where all
pixels are perfectly superimposed as a sharp full-color image.
The projector is configured through a on-screen display (OSD) menu system displayed on the image,
controlled by an IR remote, wired remote, or through the built-in keypad. The LCD screen and built-in
keypad allow some functions to be controlled without the need of the OSD, and provide an accessible
interface to view error reporting. The functions on the OSD can also be controlled using the Christie
serial protocol, through a serial or Ethernet connection to the projector. The web interface provides
access to the menu system as a virtual OSD and to features that maintain the software and settings.
Key features
Understand the important features of the projector.
• Up to 14,000 lumens
• HD (1080p), SXGA+, or WUXGA resolution
• Dual Mercury lamp illumination with 350W and 450W options
• Contrast aperture providing up to 10,000:1 contrast ratio (available on 350W models)
• Ultra-compact design and weighs less than 55lbs
• 10-bit image processor electronics with modular design
• Fully sealed optical system
• Active fan control for minimum noise level
• Selectable, motorized Yellow Notch Filter for expanded color gamut
• User interchangeable projection lenses with no-tool mounting
• Picture-in-picture (PIP)
M Series User Guide 7
020-101948-02 Rev. 1 (08-2018)
Copyright © 2018 Christie Digital Systems USA, Inc. All rights reserved.