Christie M Series WU14K-M WUXGA 3DLP Projector (No Lens) - Manual (Page 73)

Inaccurate display colors
The colors in the image are not what I expected to see.
Resolution
• The color, tint, color space and/or color temperature settings may require adjustment at your
input source.
• Try Auto Setup.
• Ensure signal connections are correct.
• Ensure the proper channel for this source is being used.
Display is not rectangular
The shape of the display is not correct.
Resolution
• Check leveling of the projector. Ensure the lens surface and screen are parallel to one another.
• Is the vertical offset correct? Make the necessary adjustments to the vertical offset on the lens
mount.
Display is noisy
The projected image contains noise.
Resolution
• Display adjustment at the input source may be required. Adjust pixel tracking, phase and filter.
Noise is particularly common on YPbPr signals from a DVD player.
• Ensure the video input is terminated (75 ohms). If it is the last connection in a loop-through
chain, the video input should be terminated at the last source input only.
• The input signal and/or signal cables carrying the input signal may be of poor quality.
• If the distance between the input source device and the projector is greater than 25 feet,
signal amplification/conditioning may be required.
• If the source is a VCR or off-air broadcast, detail may be set too high.
Troubleshooting
M Series User Guide 73
020-101948-02 Rev. 1 (08-2018)
Copyright © 2018 Christie Digital Systems USA, Inc. All rights reserved.