Genlock icon, Sync icon, 3d lut icon – RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (RF) User Manual
Page 36: Dc-in icon, Battery charge icon, Komodo operation guide

GENLOCK ICON
SYNC ICON
This icon indicates the state of the Genlock
connection.
Gray indicates that no Genlock signal is
detected.
Green indicates that the camera is receiving
and is locked to a Genlock signal.
Red indicates that the camera is receiving
and is not locked to a Genlock signal.
This icon indicates that the Timecode and Genlock
signals are synchronized to the camera's frames per
second (FPS) settings.
Gray indicates that no synchronization is
detected.
Green indicates that the camera is
synchronized with the Timecode and Genlock signals.
Yellow indicates that the camera is
synchronized with the a single camera or a Genlock
signal.
DC-IN ICON
3D LUT ICON
This icon indicates the state of DC power connection.
Gray indicates that no DC power is connected.
Green indicates that the camera is receiving DC
power.
This icon indicates the activation status of 3D LUTs.
Gray indicates that no 3D LUTs are in use.
White indicates that the camera is using a 3D
LUT.
BATTERY CHARGE ICON
This icon indicates the state of the battery connection and charge level.
Gray indicates that no battery is connected.
White indicates that the battery is connected and green shows the relative level of charge remaining.
Yellow indicates 10 minutes of power remaining.
Red indicates less then 5 minutes of power remaining.
Gray question mark indicates no communication with the battery and no power.
White question mark indicates no communication with the battery and power.
Gray exclamation point indicates error communicating with the battery and no power.
COPYR IGHT © 2 0 2 0 R E D.COM , LLC
9 5 5 -0 1 9 0 , R E V 1 .2 | 2 8
KOMODO OPERATION GUIDE