RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (RF) - Manual (Page 164)

EDGECODE
Edgecode only advances while the camera is recording frames. Each frame is sequential. When the media is replaced,
the new media starts the timer over. You can set the Edgecode timer manually by using the
Secure Format menu.
SETTING UP EDGECODE TIMECODE
To set up Edgecode Timecode on the camera, perform the following:
1. Open the Audio / Timecode menu: MENU > AUDIO / TC :
2. Swipe the touchscreen up to scroll down to Timecode Display Mode:
3. Select Timecode Display Mode. The Timecode Display Mode menu opens:
4. Select Edge and tap OK to use Edgecode. The camera displays the Edgecode on the LCD Touchscreen
COPYR IGHT © 2 0 2 0 R E D.COM , LLC 9 5 5 -0 1 9 0 , R E V 1 .2 | 1 5 6
KOMODO OPERATION GUIDE