Inserting the media, Komodo operation guide – RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (RF) User Manual
Page 153
INSERTING THE MEDIA
The camera contains a covered compartment on the right side where you insert the CFast media card.
WARNING:
Do not attach a label to the CFast media card. The heat generated by the media can weaken the label's
adhesive, causing the label to detach inside of the camera. Labels can also diminish heat dissipation and cause
excessive wear to the internal components. Removing a label from a CFast media card can possibly deform the card
body.
INSERTING THE CFAST MEDIA CARD
1. Slide the media door latch back, and open the media door.
2. Insert the CFast media card in the slot with the top of the card facing toward the front of the camera. Insert the
card until it is firmly seated.
3. Close the media door and make sure that the door latch clicks.
4. If needed, format the CFast media card. Refer to
for more information.
COPYR IGHT © 2 0 2 0 R E D.COM , LLC
9 5 5 -0 1 9 0 , R E V 1 .2 | 1 4 5
KOMODO OPERATION GUIDE