Afinia H+1 3D Printer User Manual
Page 49
Model Calibration – XYZ Axial
XYZ Axial Calibration is used to improve dimensional accuracy for a specific model.
When a printed object is found to be deviating from its theoretical dimensions, we
can use this method to correct it and achieve better precision.
To correct the dimensional error, go to
Calibrate
, find
Model Calibration
. Fill in
the M1 column with the printed object’s
actual values and enter the model’s correct
values into the S1 column.
Click Confirm. The software will save the
values and adjust printing parameters to
correct for deviation.
Keep in mind, a calibration is only valid for
the model used during the calibration
process. You may need to redo XYZ axial
calibration for a different model in order to
achieve maximum dimensional accuracy.
Contact
Afinia 3D
48
Figure 6.26
XYZ Axial Calibration