Afinia H+1 3D Printer User Manual
Page 27
Network Connection
This section includes Ethernet Network Settings and Wi-Fi Network Settings.
Ethernet Network Settings:
1.
Plug an Ethernet cable to the LAN socket at the back of
the H+1
.
2.
The Ethernet connection Status icon should be appear in the
Printer Status Bar
.
3.
You now can go to
Config
to enter Network Settings section.
4.
Click Information button to edit the printer’s Ethernet Network Settings.
Contact
Afinia 3D
26
Figure 5.9
Printer Status Bar
Figure 5.10
Network Settings
Figure 5.11
Information