Epson C82332 - Manual (Page 61)

ftp (Form feed)
The Ethernet Card will append a form feed to the end of the print
job if the destination file is given the name of “FEED” or “feed.”
For example, to send a text file called “txtfile” to the Ethernet Card
in ASCII mode and append a formfeed, use the following ftp
commands:
ascii
send txtfile feed
Ipr-Filters
Filters for lpr are controlled by the name given to the remote
printer. When setting up an lpr printer entry, a name is entered for:
the local printer name to be redirected
the host name of the station to which the print is sent
the remote printer name (name of the printer port on the
remote station).
It is this last name that the Ethernet Card uses to determine which
filters to use.
Many different remote printer names may be set up, all directed to
the same Ethernet Card remote host, and each is given a different
local printer name to be redirected. Different types of print jobs
may thus be sent to different printer names, which will then all
print out on the same printer, through the same Ethernet Card
interface, but using different filters.
Installing in UNIX 5-7